JARVIS BOOT ERROR

Report reproducible errors for Mark II here.
Forum rules
If you require assistance with an issue that is NOT reproducible error then please do NOT post on this thread, use this thread instead.

Please see the Troubleshooting guide on our wiki.
Frequently Asked Questions can be found here.

Be sure to include all relevant details such as:
    0. Perform normal troubleshooting steps*
    1. Steps to reproduce the issue
    2. Expected results
    3. Actual results
    4. Operating System
    5. Default Language

To report and check if the error has produced an "Error Report.txt" file:
    Press Windows Key + R
    Type %appdata%\..\Roaming\LINKS\Logs and hit Enter
    Open the text file called "Error Report.txt" (If you don't see it you don't have to post the file.)
    Press Ctrl + A to select all, then Ctrl+C to copy.
    Go to http://pastebin.com/ and paste text under "New Paste"
    Under "Syntax Highlighting", select "C#"
    Click "Submit" button.
    Copy link / URL from your URL bar.
    Paste the link with your post.


*Troubleshooting Steps
    Restart App
    Look for error again
    Shutdown Machine, unplug power cord, hit power button, wait 30 sec, plug power back, hit power button
    Start App again
    Look for error again
    Uninstall the software, then reinstall it
    Look for error again
    Search the forum for similar error
    Report if error is reproducible


Thank you for the feedback. Please note that we may PM you to follow-up with you regarding that issue.
arpit.ptdr
EGG
Posts: 7
Joined: February 3rd, 2019, 8:47 am

JARVIS BOOT ERROR

Postby arpit.ptdr » February 3rd, 2019, 1:27 pm

Every time I try to open JArvis. It says connectng to xx satelite and then configuring mic setup and that's it and then these followging errors occurs.

Please tell me what is going on...


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
03-02-2019 06:35:00 PM
OS: Microsoft Windows 10 Enterprise
Assembly: 3.0.1.25
Source: System.Speech
Message: Object reference not set to an instance of an object.
Line: 0
StackTrace: at System.Speech.Recognition.SpeechRecognitionEngine.InstalledRecognizers()
at jarvisWPF.language.AskForACountry()
iSource:
iMessage:
iStackTrace:
Last Command:

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
03-02-2019 06:35:00 PM
OS: Microsoft Windows 10 Enterprise
Assembly: 3.0.1.25
Source: PresentationFramework
Message: Cannot set Visibility or call Show, ShowDialog, or WindowInteropHelper.EnsureHandle after a Window has closed.
Line: 0
StackTrace: at System.Windows.Window.VerifyCanShow()
at System.Windows.Window.Show()
at jarvisWPF.App.Init()
iSource:
iMessage:
iStackTrace:
Last Command:

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
03-02-2019 06:36:02 PM
OS: Microsoft Windows 10 Enterprise
Assembly: 3.0.1.25
Source: System.Speech
Message: Object reference not set to an instance of an object.
Line: 0
StackTrace: at System.Speech.Recognition.SpeechRecognitionEngine.InstalledRecognizers()
at jarvisWPF.language.AskForACountry()
iSource:
iMessage:
iStackTrace:
Last Command:

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
03-02-2019 06:36:02 PM
OS: Microsoft Windows 10 Enterprise
Assembly: 3.0.1.25
Source: PresentationFramework
Message: Cannot set Visibility or call Show, ShowDialog, or WindowInteropHelper.EnsureHandle after a Window has closed.
Line: 0
StackTrace: at System.Windows.Window.VerifyCanShow()
at System.Windows.Window.Show()
at jarvisWPF.App.Init()
iSource:
iMessage:
iStackTrace:
Last Command:

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
03-02-2019 06:37:08 PM
OS: Microsoft Windows 10 Enterprise
Assembly: 3.0.1.25
Source: System.Speech
Message: Object reference not set to an instance of an object.
Line: 0
StackTrace: at System.Speech.Recognition.SpeechRecognitionEngine.InstalledRecognizers()
at jarvisWPF.language.AskForACountry()
iSource:
iMessage:
iStackTrace:
Last Command:

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
03-02-2019 06:37:08 PM
OS: Microsoft Windows 10 Enterprise
Assembly: 3.0.1.25
Source: PresentationFramework
Message: Cannot set Visibility or call Show, ShowDialog, or WindowInteropHelper.EnsureHandle after a Window has closed.
Line: 0
StackTrace: at System.Windows.Window.VerifyCanShow()
at System.Windows.Window.Show()
at jarvisWPF.App.Init()
iSource:
iMessage:
iStackTrace:
Last Command:

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
03-02-2019 07:06:37 PM
OS: Microsoft Windows 10 Enterprise
Assembly: 3.0.1.25
Source: System.Speech
Message: Object reference not set to an instance of an object.
Line: 0
StackTrace: at System.Speech.Recognition.SpeechRecognitionEngine.InstalledRecognizers()
at jarvisWPF.language.AskForACountry()
iSource:
iMessage:
iStackTrace:
Last Command:

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
03-02-2019 07:06:37 PM
OS: Microsoft Windows 10 Enterprise
Assembly: 3.0.1.25
Source: PresentationFramework
Message: Cannot set Visibility or call Show, ShowDialog, or WindowInteropHelper.EnsureHandle after a Window has closed.
Line: 0
StackTrace: at System.Windows.Window.VerifyCanShow()
at System.Windows.Window.Show()
at jarvisWPF.App.Init()
iSource:
iMessage:
iStackTrace:
Last Command:

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
03-02-2019 07:08:00 PM
OS: Microsoft Windows 10 Enterprise
Assembly: 3.0.1.25
Source: System.Speech
Message: Object reference not set to an instance of an object.
Line: 0
StackTrace: at System.Speech.Recognition.SpeechRecognitionEngine.InstalledRecognizers()
at jarvisWPF.language.AskForACountry()
iSource:
iMessage:
iStackTrace:
Last Command:

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
03-02-2019 07:08:00 PM
OS: Microsoft Windows 10 Enterprise
Assembly: 3.0.1.25
Source: PresentationFramework
Message: Cannot set Visibility or call Show, ShowDialog, or WindowInteropHelper.EnsureHandle after a Window has closed.
Line: 0
StackTrace: at System.Windows.Window.VerifyCanShow()
at System.Windows.Window.Show()
at jarvisWPF.App.Init()
iSource:
iMessage:
iStackTrace:
Last Command:

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
03-02-2019 07:30:07 PM
OS: Microsoft Windows 10 Enterprise
Assembly: 3.0.1.25
Source: System.Speech
Message: Object reference not set to an instance of an object.
Line: 0
StackTrace: at System.Speech.Recognition.SpeechRecognitionEngine.InstalledRecognizers()
at jarvisWPF.language.AskForACountry()
iSource:
iMessage:
iStackTrace:
Last Command:

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
03-02-2019 07:30:07 PM
OS: Microsoft Windows 10 Enterprise
Assembly: 3.0.1.25
Source: PresentationFramework
Message: Cannot set Visibility or call Show, ShowDialog, or WindowInteropHelper.EnsureHandle after a Window has closed.
Line: 0
StackTrace: at System.Windows.Window.VerifyCanShow()
at System.Windows.Window.Show()
at jarvisWPF.App.Init()
iSource:
iMessage:
iStackTrace:
Last Command:

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
03-02-2019 07:31:59 PM
OS: Microsoft Windows 10 Enterprise
Assembly: 3.0.1.25
Source: System.Speech
Message: Object reference not set to an instance of an object.
Line: 0
StackTrace: at System.Speech.Recognition.SpeechRecognitionEngine.InstalledRecognizers()
at jarvisWPF.language.AskForACountry()
iSource:
iMessage:
iStackTrace:
Last Command:

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
03-02-2019 07:31:59 PM
OS: Microsoft Windows 10 Enterprise
Assembly: 3.0.1.25
Source: PresentationFramework
Message: Cannot set Visibility or call Show, ShowDialog, or WindowInteropHelper.EnsureHandle after a Window has closed.
Line: 0
StackTrace: at System.Windows.Window.VerifyCanShow()
at System.Windows.Window.Show()
at jarvisWPF.App.Init()
iSource:
iMessage:
iStackTrace:
Last Command:

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
03-02-2019 07:37:30 PM
OS: Microsoft Windows 10 Enterprise
Assembly: 3.0.1.25
Source: System.Speech
Message: Object reference not set to an instance of an object.
Line: 0
StackTrace: at System.Speech.Recognition.SpeechRecognitionEngine.InstalledRecognizers()
at jarvisWPF.language.AskForACountry()
iSource:
iMessage:
iStackTrace:
Last Command:

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
03-02-2019 07:37:30 PM
OS: Microsoft Windows 10 Enterprise
Assembly: 3.0.1.25
Source: PresentationFramework
Message: Cannot set Visibility or call Show, ShowDialog, or WindowInteropHelper.EnsureHandle after a Window has closed.
Line: 0
StackTrace: at System.Windows.Window.VerifyCanShow()
at System.Windows.Window.Show()
at jarvisWPF.App.Init()
iSource:
iMessage:
iStackTrace:
Last Command:

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
03-02-2019 11:48:20 PM
OS: Microsoft Windows 10 Enterprise
Assembly: 3.0.1.25
Source: System.Speech
Message: Object reference not set to an instance of an object.
Line: 0
StackTrace: at System.Speech.Recognition.SpeechRecognitionEngine.InstalledRecognizers()
at jarvisWPF.language.AskForACountry()
iSource:
iMessage:
iStackTrace:
Last Command:

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
03-02-2019 11:48:20 PM
OS: Microsoft Windows 10 Enterprise
Assembly: 3.0.1.25
Source: PresentationFramework
Message: Cannot set Visibility or call Show, ShowDialog, or WindowInteropHelper.EnsureHandle after a Window has closed.
Line: 0
StackTrace: at System.Windows.Window.VerifyCanShow()
at System.Windows.Window.Show()
at jarvisWPF.App.Init()
iSource:
iMessage:
iStackTrace:
Last Command:

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Zunair
Site Admin
Posts: 2394
Joined: January 11th, 2014, 12:29 am

Re: JARVIS BOOT ERROR

Postby Zunair » February 10th, 2019, 9:12 pm

try holding shift n start jarvis.. see if that helps.. it should show that setting has been reset...

Sent from my SM-G950U using Tapatalk

arpit.ptdr
EGG
Posts: 7
Joined: February 3rd, 2019, 8:47 am

Re: JARVIS BOOT ERROR

Postby arpit.ptdr » February 12th, 2019, 8:42 am

Zunair wrote:try holding shift n start jarvis.. see if that helps.. it should show that setting has been reset...

Sent from my SM-G950U using Tapatalk


it says
backing up the config
initializing databases
connecting to satellite no. 76
launching mic setup and initialization complete.

that's it.

still not opened the popup to configure it and start it.

Zunair
Site Admin
Posts: 2394
Joined: January 11th, 2014, 12:29 am

Re: JARVIS BOOT ERROR

Postby Zunair » February 12th, 2019, 4:45 pm

on top of this forum... you can find the new install link... make sure to uninstall the other instance...

let us know the results

thanks

arpit.ptdr
EGG
Posts: 7
Joined: February 3rd, 2019, 8:47 am

Re: JARVIS BOOT ERROR

Postby arpit.ptdr » February 13th, 2019, 2:10 pm

Still Same problem.

Even this time I tried to make a new user on my pc but still the problem persists. :cry: :cry: :cry:

Zunair
Site Admin
Posts: 2394
Joined: January 11th, 2014, 12:29 am

Re: JARVIS BOOT ERROR

Postby Zunair » February 19th, 2019, 8:50 am

PM me to set up a teamviewer remote support


Return to “Mark III [Error Reporting]”

Who is online

Users browsing this forum: No registered users and 1 guest