Default commands

Report un-reproducible/random errors for Mark II here.
Forum rules
If you CAN reproduce the error please see the rules on this thread for quicker response.

Please see the Troubleshooting guide on our wiki.
Frequently Asked Questions can be found here.

Try to include all relevant details such as:
    0. Perform normal troubleshooting steps*
    1. Steps to reproduce the issue
    2. Expected results
    3. Actual results
    4. Operating System
    5. Default Language

*Troubleshooting Steps
    Restart App
    Look for error again
    Shutdown Machine, unplug power cord, hit power button, wait 30 sec, plug power back, hit power button
    Start App again
    Look for error again
    Uninstall the software, then reinstall it
    Look for error again
    Search the forum for similar error
    Report if error is reproducible

Thank you for the feedback. Please note that we may PM you to follow-up with you regarding your issue.

**If you get an error about object not set to an instance of an object....
Go to control panel and find the speech recognition section
Open it up and press start speech recognition.
Run through all of that, then when the recognizer opens, close it.
Open up jarvis and see is this helps.
Posts: 148
Joined: August 28th, 2014, 4:04 am

Default commands

Postby allalone747 » October 14th, 2017, 4:44 pm

Good day, i am using Links Version Links report that it is the latest version, When i ask most of the default commands there are no response , I had two videos in the video folder on my K:\ drive some weeks ago at the time when i ask for it to play it would play , the again for it to play the next , it would play the next , i then add another 4 videos to the same folder, but now when i ask to play it would play,but only the two that was there in the first place , it keep switching from one to the next but it will not play any of the others 4 that i have added. Please can you help
Cheers :|

Site Admin
Posts: 2422
Joined: January 11th, 2014, 12:29 am

Re: Default commands

Postby Zunair » October 30th, 2017, 9:35 am

run the update library command

Return to “Mark III [Errors]”

Who is online

Users browsing this forum: No registered users and 1 guest